How can the aerial vehicle rescue itself if it bursts?

Most of the reasons for the explosion of high-altitude trucks are caused by tire pressure. Experts pointed out that the so-called puncture tires mean that tires suddenly lose their air due to rupture in a very short time (usually less than 0.1 seconds), and punctures can occur at any time. A puncture tire can cause serious traffic accidents to the working aerial vehicles. Because when the vehicle punctures, it can take very little time for the owner of the aerial vehicle and the people on the vehicle to take a self-rescue. At this time, the car has been lost. Control, there will be rollovers, crashes, and even burning due to friction, and instantly lead to the tragedy of the destruction of cars. Foreign studies have shown that when the car is driving at speeds of 160 kilometers per hour or more accidents, the death rate of driving members is close to 100%. Preventing Tyre Typing in Aerial Vehicles: Starting from Daily Maintenance

It is advisable to bring a simple tire pressure tester. The general operation is quite simple. Pay attention to the temperature and air pressure of the tire when driving under high temperature conditions. Detailed instructions are provided in the user's manual. Every time before long-distance driving, the specified air pressure standard is guaranteed. It is found that tire pressure is insufficient and should be filled in time. It is absolutely impractical to make long-term driving. This will accelerate the wear of the tire.

The working life of tires specified by general aerial vehicles manufacturers is between 80,000 and 100,000 kilometers (or about 5 years), and it is usually necessary to develop a habit of constantly checking the condition of tire wear.

When high-altitude trucks are driving on high-temperature roads for a long time, they should take a break at a certain time and park them in a cool place, so that the temperature of the tires can continue to decrease.

Plate And Tube Integrated Cutting Machine

1. Plate and tube processing, one machine for two purposes, saving space
2. High-load mechanical structure bed, stable processing and high precision
3. Customized laser generator with small slits and less energy consumption
4. Full stroke chuck, tube diameter up to 220mm
5. Short tail material, cost saving

6. The X-axis frame beam is annealed to eliminate internal stress. After rough machining, vibration and aging are carried out before finishing to ensure the rigidity and stability of the moving parts of the cutting head.
7. The bed is equipped with high-quality linear guides, driven by servo motor, high-quality rack and pinion, so that the Z-axis slide plate can achieve reciprocating motion in the X direction.

8. In the process of movement, the limit switch controls the stroke to limit the limit, and there are elastic buffer pads at both ends to limit the mechanical limit to ensure the safety of the system operation.

9. Machine base: frame structure welded with high-quality pipes, professional welding, secondary aging treatment, and precision machining by large-scale gantry milling machines. These design and processing methods ensure that the machine tool has excellent shock resistance, high rigidity and stability.
10. A dust cover is installed on the guide rail to prevent dust debris from falling into the guide rail to affect the movement, keeping clean and smooth movement.

Plate And Tube Integrated Cutting Machine,Plate And Tube Integrated Laser Cutting Machine,Plate And Pipe Laser Cutting,Sheet And Pipe Fiber Laser Machine

GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.chittakcutting.com