What are the common problems when driving a small 8-ton crane?

With the economic development, every household owns a small car. If a family can buy a large 8-ton small crane, it is a very good event to celebrate. However, everyone buys an 8-ton small crane , then you have a relevant driver’s license. 8 tons of small cranes in the driving if there are some problems how to solve it? Most of the owners still do not understand, according to these questions, Xiao Bian take you to learn more about the 8 tons of small crane driving seen in daily life Common problems and solutions

In order to better operate the 8 tons of small cranes, Xiao Bian suggested that you first understand the following 8 tons of small cranes in the normal driving precautions which should be understood in advance, the following list of four points for your reference:

The first point: When a small-capacity 8-ton crane shifts gear manually, it is necessary to pay attention to shifting from one stage to another.

The second point: If the 8 ton small crane is in the process of driving, if there are such situations as abnormal noise, steering wheel failure, and the speed becomes faster or slower, then it is prompting everyone that the speed should be decelerated immediately. Tons of small cranes open to a safe place.

The third point: Everybody should pay attention to, we must observe the indicator of the crane's instrument panel.

Fourth point: On the way of climbing the 8-ton small crane, we should reduce the number of shifts in advance and reduce the wear and system damage of the 8-ton small crane engine.

The fifth point: In the case of driving an 8-ton small crane, if there is a fuel cut off, if the engine is not used at this time, exhausting the fuel system may cause damage to the machine.

Next, we also understand the relevant issues of the next 8 tons of small cranes when they are downhill. I believe we really want to know!

The first point: Before we drive the 8-ton small crane downhill, we should first check if the system is running normally.

The second point: Usually, when the 8-ton small crane descends, it will start the engine to start, and then slowly hang it to the lowest level, and then start the engine system and then work.

The third point: We need to prevent the 8 tons of small cranes from spinning too fast. Usually the 8 tons of small cranes' rotations refer to the rotation of the engine by the vehicle theory that exceeds the engine's standard speed.

Through the above 8 tons of small cranes in the normal operation and downhill when traveling related matters, today to everyone here, if there are other do not understand we can pay attention to our official website.

Double-Cone Rotary Vacuum Dryer

As a professional drying equipment manufacturer, we provide more than hundred sets of equipment for our users. The heating media such as high temperature heat transfer oil, middle temperature steam and low temperature hot water are available for our products. When drying viscous materials, we can design the special [copying" mechanism or set balls in the tank for you.

Applications:

It is suitable for concentration, mixing and drying of powder, granular and fibrous materials in such industries as chemical industry, medicine, food, etc., and materials that require low temperature drying(such as biochemical products), and is more suitable for drying of materials that are easy to oxidize, volatize, heat sensitive materials, irritant and poisonous materials, and materials in which breaking of crystals is not allowed.

Principle

• After the heat source(such as hot water, low pressure steam or heat transfer oil) is connected to the closed jacket, the heat is transferred from the inner shell to the materials to be dried.

• Driven by the power, the tank makes slow rotation and the materials in the tank are continuously mixed so as to realize the purpose of drying.

• When the materials are under vacuum, the steam pressure reduces to make the moisture(solvent) on material surtaces reach the saturation status and evaporate, and discharged and recovered timely from the vacuum pump. The moisture(solvent) inside the materials is penetrated, evaporated and discharged towards the surfaces. The three processes are carried out continuously, so that the materials are dried within a very short time.

Features

• During oil heating, automatic constant temperature control is adopted to dry biochemical products and mineral raw materials.

Temperatures vary within the range of 20-160℃.

• The heat efficiency is 2 times higher than that of common ovens.

• Indirect heating will cause no pollution to the materials, conforming to GMP requirements. The equipment is simple to repair and operate and easy to clean.

Double-Cone Rotary Vacuum Dryer,Rotary Cone Vacuum Dryer,Double Cone Vacuum Dryer,Double Cone Vacuum Dryer Machine

Jiangyin Jirui Machinery Manufacturing Co,LTD , https://www.jiruimachine.com