Tungsten Carbide Hssc-1 Scoring Wheel
- Model NO.: LF- HSSC-1 scoring wheel
- Application2: Ceramic Tile Cutter Performance Good on Tools
- Application4: Floor Tile Cutter Wheels Cutting Floor Tiles
- Type: Manual Tile Cutter
- Processing: Brick Molding Machine
- Automation: Using at Manual Tile Cutter
- Specification: RoHS
- Application1: Best Tile Cutter Wheels Using on Manual Ceramic Ti
- Application3: Ceramic Tile Cutters Wheels Using on Tile Flooring
- Application5: Floor Tile Cutter Wheels Tiling Tools, Tile Tools
- Method: Hydraulic Pressure
- Product: Tile
- Trademark: LFJS
- Origin: Changsha, China
Adopt high quality materials of tungsten carbide, with titanium coating, which could increase the service life and hardness.Â
Please check the details:
| Grade |
Hardness (HRA) |
Density (g/cm3) |
Cutting life |
TRS (ISO3327N/mm2) |
Grain size (um) |
| LFC-1 | 91.5 min | 14.8 | 2000m min | 2200 | 1 |
| LFC-2 | 91.5 min | 13.51 | 1000m min | 2000 | 1.2 |
| LFC-3 | 91.5 min | 14.41 | 400m min | 1800 | 1.6 |
| LFC-4 | 91.5Â min | 6.1 | 150-200m | 1200 | 1 |
Â
|             Ceramic tile cutter wheels---Type and Grade | |||||||||||
| Type | Basic size(mm) | Grade | |||||||||
|
outside diameter (OD) |
tolerance    (OD) |
      inside diameter (ID) | tolerance (OD) | Thickness |     tolerance of Thickness | Angle | LFC-1 | LFC-2 | LFC-3 | LFC-4 | |
| Service life(≥m) | |||||||||||
| Φ22×Φ14×2.6 | 22 | ±0.05 | 14 | ±0.05 | 2.6 | ±0.05 | 90°  100°  110°  120° | 2000 | 800 | 400 | 200 |
| Φ22×Φ14×2.0 | 22 | ±0.05 | 14 | ±0.05 | 2 | ±0.05 | |||||
| Φ22×Φ13×2.0 | 22 | ±0.05 | 13 | ±0.05 | 2 | ±0.05 | |||||
| Φ22×Φ12×2.2 | 22 | ±0.05 | 12 | ±0.05 | 2.2 | ±0.05 | |||||
| Φ22×Φ10.5×2.0 | 22 | ±0.05 | 10.5 | ±0.05 | 2 | ±0.05 | |||||
| Φ22×Φ6×4.6 | 22 | ±0.05 | 6 | ±0.05 | 4.6 | ±0.05 | |||||
| Φ22×Φ6×2.0 | 22 | ±0.05 | 6 | ±0.05 | 2 | ±0.05 | |||||
| Φ20×Φ5×3.0 | 20 | ±0.05 | 5 | ±0.05 | 3 | ±0.05 | |||||
| Φ18×Φ6×3.0 | 18 | ±0.05 | 6 | ±0.05 | 3 | ±0.05 | |||||
| Φ18×Φ6×3.8 | 18 | ±0.05 | 6 | ±0.05 | 3.8 | ±0.05 | |||||
| Φ16×Φ6×4.9 | 16 | ±0.05 | 6 | ±0.05 | 4.9 | ±0.05 | |||||
| Φ16×Φ6×3.0 | 16 | ±0.05 | 6 | ±0.05 | 3 | ±0.05 | |||||
| Φ16×Φ6×2.0 | 16 | ±0.05 | 6 | ±0.05 | 2 | ±0.05 | |||||
| Φ16×Φ6×1.5 | 16 | ±0.05 | 6 | ±0.05 | 1.5 | ±0.05 | |||||
| Φ16×Φ4×3.0 | 16 | ±0.05 | 4 | ±0.05 | 3 | ±0.05 | |||||
| Φ15×Φ6×2.9 | 15 | ±0.05 | 6 | ±0.05 | 2.9 | ±0.05 | |||||
| Φ15×Φ6×2.0 | 15 | ±0.05 | 6 | ±0.05 | 2 | ±0.05 | |||||
| Φ15×Φ6×1.5 | 15 | ±0.05 | 6 | ±0.05 | 1.5 | ±0.05 | |||||
| Φ14×Φ6×1.5 | 14 | ±0.05 | 6 | ±0.05 | 1.5 | ±0.05 | |||||
| Φ13.5×Φ6×2.0 | 13.5 | ±0.05 | 6 | ±0.05 | 2 | ±0.05 | |||||
| Φ13.5×Φ6×1.5 | 13.5 | ±0.05 | 6 | ±0.05 | 1.5 | ±0.05 | |||||
| Φ13.5×Φ6×1.0 | 13.5 | ±0.05 | 6 | ±0.05 | 1 | ±0.05 | |||||
| Φ12×Φ3×3.0 | 12 | ±0.05 | 3 | ±0.05 | 3 | ±0.05 | |||||
| Φ10×Φ4×3.0 | 10 | ±0.05 | 4 | ±0.05 | 3 | ±0.05 | |||||
| Φ8×Φ1.5×1.1 | 8 | ±0.05 | 1.5 | ±0.05 | 1.1 | ±0.05 | |||||
| Φ7×Φ1.9×1.2 | 7 | ±0.05 | 1.9 | ±0.05 | 1.2 | ±0.05 | |||||
| Φ6.4×Φ1.5×1.3 | 6.4 | ±0.05 | 1.5 | ±0.05 | 1.3 | ±0.05 | |||||
| Can be produced according to customer requirements | |||||||||||
Â
Â
2, Advantages:
1. Fast cutting speed, only few seconds could finish the task
2. Perfect effectiveness, high precision linear and margin smooth   Â
3. No need water, with low noise and little dust.Â
4. Cutting service life is over 2,500 meters
5. Operation for tile cutter is simple and convenient, safe.      Â
Â
Â
3,Application:
Suitable for the hard polishing brick, glazed pottery, prevent slippery floor tile, exterior wall steel brick and glass,etc.
4, Remark:
We can be produce according to customer requirements.
Stacker Reclaimer Slewing Ring,Slewing Ring,Slewing Bearing
Slewing Bearing Co.,Ltd. , http://www.slewingring-bearings.com