Tri Clamp Micro-Oxygenation Carbonation Stone Assembly

Product name: Threaded to Tri Clamp Carbonation Stone Stainless 316L

The Carbonation Stone is mainly used in the Brewing equipment like fermenter, bright tank etc. to create CO2 in the beer, typically an accessory found on brite beer fermentation tanks, are designed to be directly mounted via a Tri Clamp fitting. Each carbonation stone, made from sintered stainless steel SS316, is a submersible porous body that diffuses CO2 gas directly into brewing liquid. In an ideal system, the stone is mounted on the lowest part of the brite tank providing for the longest distance for CO2 to travel to the head. Some brewers use a carbonating stone inside a conical fermenter (or Uni Tank), rather than a brite tank. The most efficient system on the market for carbonation. Submersible porous body diffuses CO2 gas directly into liquid to create carbonation. NPT/NPS port size is based on NPT/NPS pipe size interior diameter (ID). All Tri Clamp carbonation stones have the following features:

• 1inch or 1.5 inch Tri Clamp fitting mounts on tank ferrule
• 1/4 inch FNPT gas connection
• 20mm diameter stone
• 2 micron or 0.5 micron porosity
• Stainless steel SS316 body
• 4inch,6inch,8inch,10inch,12inch or other requirements of carbonation stem length
• Connection option: Weld, Clamp or Male/Female Thread

Application:

1. liquid filtration

1, the pharmaceutical industry, various syrup filters, injection water injections saline injections without filtration.

2, industrial water, water, gas water clarify degerming.

3, beverage, food, brewing industry filter.

4, electronics, optical lens grinding high water.

5, the chemical industry pH liquid filtration Alcohol recovery.

2. gas trap

1, the pharmaceutical industry acidic gases dry dust.

2, pharmaceuticals, beer brewing industry preparation of sterile air.

3, the aviation and transportation industries, high-pressure air filtration.

4, the chemical fiber industry with mixed gas purification.

5, various air compressor oil filter impurities in the air

We manufacture T304 or T316L Sanitary Polish Butt Weld Fittings found primarily in the Bakery, Beverage, Cosmetic, Dairy, Food or Pharmaceutical Industries. Our Sanitary Butt Weld Fittings can meet or exceed 3A/DIN/BPE etc standards with an ID polish of 180 Grit or 25 Ra on the Inside of the Tube and a 150 Grit or 32 Ra on the Outside of the tube.  NEW TEK supplies each Sanitary Butt Weld product with the size and alloy and a heat number for full traceability for either alloy. Our Sanitary Butt Weld Fittings are made to close tolerances to permit easy and fast installation of a corrosion resistant, crevice free, fully sanitary process line. As a suggestion, you may wish to weld using the tungsten gas method  for true fusion of wall to minimize pitting and thinning. Material test reports can be provided. 
QC Team




Warehouse



We ship products all over the world.
 

More products we can provide: 
       1  .Sanitary valve
            Sanitary Butterfly Valves
            Sanitary Check Valves
            Sanitary Ball Valvess
            Sanitary Reversal Valve
            Sanitary Diaphragm Valves
            Sanitary Sample Valves
            Sanitary Safety Valves
            Sanitary Control Valves
            Sanitary Relief Pressure Valves
        2. Sanitary Pipe Fittings
            Sanitary Elbow
            Sanitary TeeSanitary Reducer
            Sanitary Cross
            Sanitary Triclamp Ferrule
            Sanitary Cap
            Sanitary Pipe Hanger
            Sanitary Tank Cleaning Ball
            Sanitary Hose Joint
            Sanitary Unions
            Sanitary Sight Glass
            Sanitary Strainer
        3. Sanitary Manways
            Sanitary Round Manway without Pressure
            Sanitary Round Manway with Pressure
            Sanitary Square Manway
            Sanitary Oval Manway
        4. Sanitary Pumps
            Sanitary Centrifugal Pump
            Sanitary Lobe Pump
            Sanitary Self Priming Pump
         5.Sanitary Tanks
            Storage Tank
            Fermentation Tank
            Mixing Tank
            Warm-keeping Tank
          6.Sanitary Tube 
            Seamless Tube 
            Weldless Tube
          7.Sanitary Gasket
             Silicone/EPDM Gasket for Triclamp
             Silicone/EPDM Gasket for Union
             Silicone/EPDM Gasket for Butterfly Valve
             Silicone/EPDM Gasket for Manhole Cover     


 

Butter And Cream Tube

A Skincare Packaging Tube is a type of packaging that is used to store and dispense skincare products such as creams, lotions, gels, and serums. These tubes are typically made of plastic or aluminum and come in a variety of shapes and sizes, depending on the product they are designed to hold.
Mustard packaging tubes are a type of packaging that is specifically designed to store and preserve mustard. These tubes are made from materials such as plastic or aluminum and are sealed with a cap or lid to ensure that the mustard stays fresh and free from contamination.

Butter and cream tube packaging is a type of packaging that is specifically designed to store and dispense butter and cream products. These tubes are typically made of plastic or metal and are designed to be easy to use and convenient for consumers.

The packaging typically features a screw-on or snap-on lid that seals the tube to prevent air and moisture from getting inside. This helps to keep the butter or cream fresh for longer periods of time.

Butter and cream tube packaging can come in a variety of sizes and shapes depending on the specific product being packaged. Some tubes may be long and narrow, while others may be wider and shorter. The packaging may also feature branding and labeling to help consumers easily identify the product inside.

Overall, butter and cream tube packaging is a popular choice for manufacturers and consumers alike due to its convenience and ease of use.

Butter And Cream Tube,Butter Tube,Cream Tube,Empty Tube For Cream

Suzhou Sanxin Tube Co.,Ltd. , https://www.sxsofttube.com