Toe Part Cooling & Heating Shoe Forming Machine

• Model NO.: Xx0194
• Voltage: 220V/50Hz
• Air Pressue: 0.7MPa
• Production: 1200 - 1500 Pairs/ 8hrs
• Transport Package: Wooden Case
• Origin: Zhejiang, Wenzhou

• Machine Size: 1600*900*1700mm
• Power: 2.7kw
• N.W.: 370kgs
• Trademark: SOGU
• Specification: CE
• HS Code: 33039609

Xx0194 Toe-Part Cooling & Heating Shoe Forming Machine

This machine is suitable for PU leather, cowhide, pigskin, activities soles, foam, shoe, leather goods, all kinds of knitting cotton molding or hot embossing molding. All kinds of EVA products, soles, insoles and sandals surface active materials such as cold setting, can be made into insoles, uppers, soles, bags, glasses case, handbag and other products.
 
1, Normal toe pre-moulding is moulded into stitch down shoes.
2 ,It's suitable for moulding of toe puffs made of different materials.      
3, For hot moulding,upper and lower moulds can be heated simultaneously to  soften vamp for better jointing.          
4, For cold mould clamp, Teflon band and toe mould ar combined to use, which can be freely adjusted in light of vamp thickness and can achieve a perfect  moulding effect.
5, The last toe is mde of Teflon band based on that offered by customers with a high precision.                         
6, The hot mould of the machine contains steam system which will make the vamp more flexible and lustrous.
7, The adoption of environment friendly freezing system features high speed and good result with freezing temperature up to -30C.
8.After moulding , the liner , rubber sheet and vamp are.colsely jointed without crinkling, deformation and bubbling.  
9. The film downward movement patterns.


 




 

With more than 30 years customers` actual operation and technology improvement, 1500mm two/three/five layers fully automatic stretch film machine is mature and cost-effective, some whole production line adopt melt metering pump technology and high precision pressure sensor system, which can stably and effective to control the pressure. It will highly improves film horizontal and vertical`s tension strength and anti-puncture resistance and make the film meeting the high requirement for machine packing film. The cooling roller adopts big diameter design and special double-decker runner, greatly improving the cooling effect of high-speed production to guarantee good uniformity of cooling roll surface temperature. The film produced by this machine has good shrinking memory function and self-sticky, which can be widely used in wrapping of palletized goods. It`s good substitute for hot shrinking packing film during transportation.

*Related Products:pe casting film machine,pe cling film machine,pe protective film machinery.

Machine Pictures:

Plastic melt metering pump is more and more important in extrusion process, especially in high-end products industries, such as high quality sheets, pipes, BOPP, optical cable.

Installing the melt metering pump in the cast stretch film unit, which can keep the production constantly and efficiency. The pump can improve the product quality, stable the production and decrease the energy consume.

The housing is made of chromium-nickel alloy or nickel-base alloy, titanium alloy. The gear is made of quenching chromium steel, other metal materials are also applicable. Bearing is made of graphite NIAG, zirconium oxide or quench tool steel.

Advantages:

FAST AND STABLE FLOW SUPPLY

Eliminated the extruder`s pulsation wave. Improve the product quality, decrease the defective rate, and decrease the waste, which can save 2% material and 25% of the unit power consumption.

STABLE AND EFFICIENCY PRESSURE CONTROL

The melt pump can provide a stable pressure, which short the discharge time obviously and make the production effectively.

INCREASE THE EXTRUDER OUTPUT AND THE MACHINE LIFE

It has been found that after install the melt pump, the max pressure wave value is the pressure after pump. Which can make the inner pressure of the extruder decrease, the melt shear strength decrease, the temperature curve gently, and restrain the temperature rising. Also the melt pump can avoid the damage to the extruder from the high pressure.

Produced Films

1500mm stretch film machine unit

1500MM Black Stretch Film Machine Unit,1500MM Hand Stretch Film Machine Unit,1500MM Plastic Stretch Film Machine Unit,1500MM Packaging Stretch Film Machine Unit

CHANGLONGXING SCIENCE & TECHNOLOGY (SHENZHEN) CO.,LTD , http://www.clxmachinery.com