Tips for maintenance of biochemical incubator
In many laboratory equipment, although the biochemical incubator is not a very expensive experimental equipment, it is also a product with a low price. Therefore, in order to save costs, the product should be used and maintained reasonably. The maintenance tips of the biochemical incubator are mainly explained in terms of no, attention and environment.
1. Never Do not apply extra pressure to the glass door or scratch the glass surface with sharp objects, otherwise it will easily cause the glass to break or produce scratches. During use, no objects should block the air duct circulation holes or make the air duct circulation difficult.
2. Attention Check the leaking pipes and interfaces of the biochemical incubator for leaks or blockages, and regularly clean the dust in the water receiving box. If you have any questions, you should contact the technical staff for guidance and do not operate without permission;
Pay attention to regularly check the compressor refrigerant filling needle valve interface for looseness;
Care should be taken to keep the inside of the cabinet clean during use. Wipe in time if there is dust or oil on the surface.
3. Environment During the maintenance of the biochemical incubator, the influence of the environment on the product cannot be ignored. The place where the biochemical incubator is stored should ensure that the relative humidity does not exceed 80%, without corrosive gases and a good indoor;
The equipment should be placed in a dry, flat, no toxic and harmful, no strong electromagnetic field and radiant energy indoor place, and should avoid direct sunlight, there should be a certain space around the equipment to facilitate maintenance;
In order to ensure the accuracy of temperature control, it is recommended to use in the environment of 18 ~ 30 ° C;
There should be shockproof, moistureproof and other necessary protective measures during transportation. Do not over-tilt or handstand the transportation, and handle it with care.
The above is an introduction to the maintenance tips of the biochemical incubator. TOP Yunnong provides various volumes of biochemical incubator products. If you have product requirements, please contact us. If you have already purchased our products, there are problems in use. Welcome to contact us and hope that our products can provide professional technical support for related experimental research.
Co2 Laser Marking Machine is just a laser beam that does not damage the object or mechanical parts to be marked when marking. The laser marking machine manufacturer can mark images or texts on specific objects according to the instructions.
Co2 Laser Marking Machine,Co2 Laser Marking,Co2 Marking Machine,Co2 Galvo Laser Marking Machine
Feiquan Laser Technology Wuxi Co., Ltd. , https://www.feiquan-laser.com