Panel Roll Forming Machine From China

Model NO.: panel roll forming machine
Drive Way: Chain or Gear Box
Size: Depends on Final Design
Forming Speed: 16~20m/Min or According to Customer′s Requirment
Delivery Time: 30 Days Finished and 10 Days More to Test
transportation: by Sea or Train
Operating: One Experienced Person Is Enough
Trademark: STW
Transport Package: Machine in 40′′gp,Other Accessories in Wooden Case
Specification: CE
Origin: China
HS Code: 84552210
No.       item Parameter(all is subject to our final design)
1
 		 Suitable raw material Type Common galvanized & pre-painted steel
Yield strength 235MPa(or other high strength steel)
Thickness(mm) 0.4-0.7
width(mm) According to final design
2 Manual uncoiler's capacity Max.5tons
3 Forming speed(m/min) About 18-20m/min
4 Main motor power(KW) 7.5kw
5 Hydraulic power(KW) 3kw
6 Forming roller groups  Around19-20 groups
7 Raw material of forming roller High quality No.45 steel
8 Raw material of cutting blade Cr12mould steel with quenched treatment
9 controlling system Mitsubishi PLC& converter
10 Suitable industrial voltage  According to your special requirement
11 Machine dimensions(L*W*H) 6.8m×1.8m×1.52m
12 Machine weight About 9-10tons
Roof Panel Roll Froming Machine; Steel Corrugated Sheet Forming Machine; Steel Sheets Forming Machine; Roll Forming Machine; Forming Machine; Cold Roll Forming Machine; Steel Corrugated Forming Machine.

Panel Roll Forming Machine From China
Components:
The Uncoiler and Its Base
Coil Sheet Guiding and Adjusting Equipment
Film Covered Device
Main Roll Forming System
Post-Cutting Device
Hydraulic Station
PLC Control System
Support Table
Panel Roll Forming Machine From China
The Technical Parameters:
Suitable Raw Material: Color Steel Sheet; Galvanized Steel Sheet
Thickness of The Material: 0.4m to 0.7mm
Yield Strength of Material: 235mpa
Uncoiler's Loading Capacity: Max. Capacity: 5000kgs. (Can Be Increased to Be 10 Tons)
Forming Speed: About 15m/Min
Main Motor Power: 5.5kw(Depend on Final Design)
Hydraulic Station Power: 2.2kw(Depend on Final Design)
Controling System: Mitsubishi PLC & Converter
Voltage: 380V, 3 Phase 60Hz or According to at Buyer's Requirment.
The Quantity of The Roller Group: At Lest 15 Groups(Depend on Final Design)
Machine Dimension: About 20m*1.5m*1.4m(Depend on Final Design)
Total Weight: About 10000kgs(Depend on Final Design)
Material of Roll Former System
Roller: High Grade No. 45 Forged Steel, Plated Hard Chromed on The Surface of Rollers
With Thickness 0.05mm.
Active Shaft Material: High Grade No. 45 Carbon Wrought Steel at Diameter 75mm.
Cutting Blade: Cr12 Mould Steel with Quenched Treatment.

Working Flow
Decoiling The Sheet---Guiding The Sheet---Covering The Film---Roll Forming---Measuring The Length---Cutting The Panel---Panels to The Supporter
Panel Roll Forming Machine From China

Hydraulic Fittings And Machines

Hose Fitting Machine,Hydraulic Hose Couplers,Hydraulic Hose Fitting Machine,Hydraulic Fittings And Machines

SHIJIAZHUANG STRONGFLEX I/E CO.,LTD. , https://www.sjzhydraulichose.com