NE bucket elevator | direct NE bucket elevator

2019-05-13 13:13:06

NE bucket elevator | direct NE bucket elevator
The NE board chain bucket elevator is a plate chain type, gravity-induced discharge Lifting Equipment. It is suitable for vertical conveying of powdery, granular, small-grained or non-abrasive materials, such as raw materials, cement, coal, limestone, dry clay, clinker and so on. The material hoist is a new type of product developed through the introduction of foreign advanced technology. The NE-type chain bucket elevator is an in-flow type feeding material. The material flows into the hopper and rises to the advanced level by the plate chain. It discharges itself under the gravity of the material. The material of the chain is the same as that of the th ring chain elevator. It is made of high-quality alloy steel and is wear-resistant and reliable. The drive part adopts hardened gear reducer, and the main technical parameters conform to the standard of the Ministry of Machinery (JB3926-85).

Dock Ramp

stationary adjustable loading dock leveler ramp main role is a bridge between the cargo table and transport vehicles, makes forklift load and unload quickly .One end of the dock ramp is as high as the cargo table; the other side is on the rear edge of vehicle. it can automatically adjust height according to different car models and wagon box change in the process of loading and unloading.

There are stationary hydraulic dock leveler, dock leveler, stationary Loading Dock Ramps, dock leveler ramp, mobile dock ramp yard ramp,hydraulic loading ramp

Features

System: The free maintenance designing for the long run

Safety: Structural safety legs provide supporting and below-dock loading. 10 Amp motor, hydraulic pump, Motor-runs off 220V single-phase electrical outlet

Structure:50,000 PSI high-tensile steel deck;

lip assembly depending on selected dock levler capacity;

Integral maintenance struck for deck spporting;

lip extension extends lip at full height;

clean-frame design for easy clean-up,maintenance and inspction;

Operation:push-botton desinging for operating

Working range:-250MM to + 300 MM; -300MM to +450 MM

Capacity: 25000LBS to 35000LBS

Size: 6''x8'';7''x8'',6.5''x8'';6.5''x8''(Ft.)

Dock Ramp

Dimensions and specifications
Length mm	2000/2500 /3000/3500/4500 mm
Width mm	1800/2000/2200 mm
Operating range mm	up	304 365 425
	down	300 300 300
Thickness of the top sheet on the platform cover	Standard* 8/(0,8-2,4)* mm
Thickness of the lip	16mm
Color**	Blue RAL 5005
Number of lift cylinders	Standard	1
	on request	2
* In the brackets is the height of the embossing.
** stoven baking, pre-treated in shot blasting chamber.
Technical specifications
Load capacity	6000 kg (60 kN)/10000 kg (100 kN)
Maximum point load	top sheet 8 mm	6,5 N/mmÂ²
Motor hydraulic unit	1.1KW
Supply voltage	380V,3 phases
Control voltage	24V
Control unit protection class	IP54
Working fluid	Mobil DTE10 EXCEL
Class of surface cleaning before painting	Sa2
Thickness of painted layer	60-90Î¼m
Operating temperature	-30 -- +50â„ƒ
Configuration and accessories
	Standard	Optional
Mounting type	Embedded/suspended	Other upon request
Colour	Signal blue (RAL 5005)	Other upon request
Lip	Length - 400 mm	Length - 500 mm, segmented lip, tappered lip
Hydraulic system	1 lift cylinder, 1 control cylinder	2 lift cylinders, low temperature oil â€“50Â°C
Seal	PVC-seal or brush along perimeter
Heat insulation	Polyurethane foam insulation under upper deck