The use of lighting fixtures is a prerequisite for ensuring safe production and safe lighting. The following items should be noted:
1. Lamps must be used at a predetermined voltage and frequency. Grounded lamps must always be checked for grounding.
2. Ordinary lamps should not be used above and near heaters such as electric, gas and kerosene stoves or in places where steam is directly encountered.
3. Try not to repair lamps in dangerous places such as gas and steam.
4. The lamps for indoor use cannot be moved to outdoor use. Fixtures cannot be fitted with bulbs exceeding the specified wattage.
5. When changing lights, removing covers and fuses, the power must be cut off.
6. Regular inspections of safety lighting fixtures should be made to ensure that no abnormalities occur.
7. Do not place items such as paper and cloth near the luminaire or cover it.
8. Use warm water to scrub the lamps. Do not scrub with gasoline, volatile oil, etc.
9, the metal part of the lamp can not be used at will. The dust behind the lamp should be cleaned with a dry cloth or tassel.
10. When an abnormal situation occurs during the use of lamps, stop using it, cut off the power, and check.
Solder Ring Copper Fittings
To obtain perfect joins, inside of the solder ring copper fitting and the outside of the copper pipe are cleaned using coarse steel wool, flux paste is applied, the pipe is then inserted into the fitting and heat applied from a portable propane torch until a ring of solder shows at the edges of the fitting. Sizes we have available are from 8mm to 54mm For EN1254-1 and 1/2" to 2" for ASME B16.22 ,solder ring Copper Fittings,presolder copper fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings
solder ring copper fittings,presolder copper fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings
Taizhou Runde Company , https://www.zjbrassfittings.com