Huayang Bridge, 185-year-old, Sichuan Province, partially collapsed due to flooding

Huayang, 185-year-old bridge pier due to flood flushing part of the diesel generator | diesel generator price / 2010-07-29

Yesterday morning, in the west of Shuangliu Huayang, Sichuan, a 185-year-old Tongji Bridge was erected on the Fuhe River. The night before, a bridge pier of the Tongji Bridge and the adjacent inner wall of the bridge arch partially collapsed. The century-old bridge was suspended.
The relevant authorities stated that the preliminary analysis of the collapse was caused by the recent flooding of the pier base. The future of the ancient bridge is to maintain the original maintenance or dismantling reconstruction, the relevant departments are organizing experts to demonstrate.
The middle part of the ancient bridge pier collapsed in the night
Early in the morning yesterday, for some Huayang residents accustomed to living in Hedong and shopping for vegetables in Hexi, crossing rivers became inconvenient. The Tongji Bridge, which crosses the river east and west across the Fuhe River, was put on a cordon and prohibited passage. Looking from afar, one of the six piers in the river waters collapsed, and the other revealed nearly 10 centimeters wide cracks. Only the stone carvings on the bridge's mouth were preserved. In the adjacent arch, nearly one-third of the area's inner wall collapsed, but there was no significant damage to the deck. More than 10 pieces of rock are still clearly visible on the river beach that is more than 10 meters downstream from the arch bridge.
“The loud noise of the bridge pier collapsed.” The owner of the bridge’s tea shop remembered clearly that the sound of falling heavy water from the river surface had passed from 8:00 pm the night before yesterday. Most riverside residents at both ends of the arch bridge heard this noise. Master Chen, a resident of Xiehe Street, said that he was uneasy from hearing the noise. It was not until yesterday morning that he discovered that the bridge pier had been washed away by water.
Some residents claimed that the bridge had a second pier from west to east. There had been cracks in the past two or three months before, but at that time the bridge pier was not tilted. The third pier that collapsed appeared to have been breached by a stream of water with “almost no sign” and the inner wall of the arch above it collapsed.
The 185-year-old bridge has been busy
It is understood that Tongji Bridge was built in Qing Daoguang for five years (1825). It was originally a seven-hole stone arch bridge, but the eastern end of the first hole was destroyed. The bridge is one of the most traditional traditional stone arch bridges in the western Sichuan Plain. In May 2003, the bridge was approved by the Shuangliu County People's Government as the Shuangliu County Heritage Protection Unit. In 2006, relevant departments had implemented reinforcement and maintenance of the bridge.
For this 185-year old bridge, local residents, especially some elderly residents, have deep feelings. Aunt Zhao, who is in her 70s, said that she lived in Hexi and she liked to walk through Tongji Bridge from her childhood to Huayang’s rush. It was once the main road of a busy city. “The sculpture on the bridge is beautiful. We have also painted according to it.” According to another old man, in the early summer, in the early summer, there were always some naughty boys who jumped violently from high places on the bridge. Bathe in the river water.
In recent years, the Old Bridge was protected after being repaired many times. Only pedestrians and non-motor vehicles are allowed to pass through, but people are still coming and going. Due to the fact that there is a food market in the west of the bridge, many residents rush to buy food from the bridge across the river in the east, and when they pass through Tongji Bridge, they will stop on the bridge. “It's a pity that this time the bridge pier was washed, and the old bridge must be overhauled.” Some residents hope that they will retain the original appearance of the ancient bridge.
Maintenance or reconstruction remains to be demonstrated
Yesterday, the relevant departments have built brick walls on the east and west sides of the Tongji Bridge, and set warning signs to prohibit pedestrians from passing.
A person in charge of the Shuangliu County Cultural Tourism Administration said that after learning of the partial collapse of the bridge pier and the bridge tunnel, the bureau’s staff, including the urban management, construction, and safety supervision departments, all rushed to the scene to investigate and handle the incident. The preliminary investigation opinion is that the collapse occurred due to the flooding of the pier of the bridge pier.
According to reports, the Shuangliu County Bureau of Culture and Tourism will report the situation to higher-level cultural relics protection units, and organize experts in construction and bridges to conduct on-site inspections and demonstrations. After considering the opinions of the comprehensive transportation and construction departments, they will decide whether to proceed with maintenance or reconstruction. .
[link] Huayang Tongji Bridge
Tongji Bridge is located on Fuhe River on the west side of Huayang Street in Shuangliu County, also known as the Zhongxing Bridge. Built in Qing Daoguang five years (1825), the bridge is an east-west direction, stone structure seven-hole arch bridge, bridge length 98.7 meters, width 10.1 meters, height 9.7 meters, on both sides of a high 0.78 meters bridge column, the column embedded stone plate There are embossed on the board, the contents of the characters, birds, animals, flowers and birds. Bridge Pier has 12 Chinese zodiac signs. There are “two dragons grab the treasure” on the hole in the bridge, and there is a bronze dragon sword on the top of the cave. The bridge was repaired many times and is now one of the rare traditional stone arch bridges in the western Sichuan Plain. May 27, 2003, approved by the Shuangliu County People's Government as a county-level cultural relics protection unit.
Next:Installation, use and regulation of marine diesel generator sets
Previous:Smart Grid Brings Major Development Opportunities to Power-related Industries

Precision Turning Milling Composite Machine Tool

The advanced tool for heavy cutting processing, the overall combination of precision high-speed heavy cutting.

Advantages:
1.Improve production efficiency: automatic production can be realized, and the machining process is highly automated without manual sorting, symmetry and clamping operations. Multi-axis machining can be carried out simultaneously, which greatly improves production efficiency and saves labor costs.

2.Guarantee processing accuracy: The processing technology mastered is high, with high precision and only subtle level of processing error, which ensures the processing quality. It is also capable of automatic part measurement and automatic correction of deviations of machining tools, which ultimately makes each workpiece flawless.

3, increase the flexibility of the machine tool: the use of programmable CNC system, able to quickly modify the processing program, while you can process a variety of complex parts, more flexible than traditional machine tools. Even a variety of complex shapes and sizes of parts can be easily processed.

4, reduce labor costs: compared to traditional CNC machine tools, more automated, able to achieve fully automated production and processing, rarely need manual intervention, reducing the investment in labor costs.

5.Improve manufacturing quality: a high-precision computer-aided system is used to minimize errors, while the operation process is simple, saving the operator's fatigue during operation, making the processed parts more standardized and exquisite. Its production quality is better than the parts produced by traditional machine tools.

CNC LATHES

Precision Turning Milling Composite Machine Tool,Cnc Machine Tool,Roll Turning Lathe,Multi Axis Machine Tool

Ningbo Yien Machinery Co., Ltd , https://www.nbyienmachinery.com