High Quality Made in China OEM Aluminium Alloy Die Casting

Model NO.: OEM
Pressure Chamber Structure: Vertical
Tolerance Grade: 7
Casting Surface Quality Level: 2
Certification: ISO 9001:2008
Trademark: OEM
Transport Package: Carton + Pallet
Specification: Acc. to Customers′ Demand
Origin: China
Material: aluminium alloy, zinc alloy
Process: High Pressure Die Casting
Finish:Deburring,Machining
Surface Treatment: Shot blasting, Anodic oxidation,Sand blasting, Painting,Powder coating Application: Auto, construction, industry, electrical power, etc.
Services:OEM/ODM
Certification:ISO9001:2008
Package: Pallet, Carton, Wooden cases, as customer's request

High Quality Made in China OEM Aluminium Alloy Die Casting
 

Hot-chamber die casting


Schematic of a hot-chamber machine

Hot-chamber die casting, also known as gooseneck machines, rely upon a pool of molten metal to feed the die. At the beginning of the cycle the piston of the machine is retracted, which allows the molten metal to fill the "gooseneck". The pneumatic- or hydraulic-powered piston then forces this metal out of the gooseneck into the die. The advantages of this system include fast cycle times (approximately 15 cycles a minute) and the convenience of melting the metal in the casting machine. The disadvantages of this system are that it is limited to use with low-melting point metals and that aluminium cannot be used because it picks up some of the iron while in the molten pool. Therefore, hot-chamber machines are primarily used with zinc-, tin-, and lead-based alloys.

Cold-chamber die casting

A schematic of a cold-chamber die casting machine.

These are used when the casting alloy cannot be used in hot-chamber machines; these include aluminium, zinc alloys with a large composition of aluminium, magnesium and copper. The process for these machines start with melting the metal in a separate furnace.Then a precise amount of molten metal is transported to the cold-chamber machine where it is fed into an unheated shot chamber (or injection cylinder). This shot is then driven into the die by a hydraulic or mechanical piston. The biggest disadvantage of this system is the slower cycle time due to the need to transfer the molten metal from the furnace to the cold-chamber machine.
High Quality Made in China OEM Aluminium Alloy Die Casting
 

Halogen Capsule Bulb

Halogen Capsule Bulb, Halogen Light,Led Bulb Light,Incandescent Light

LED Bulb Co., Ltd , http://www.nbledbulb.com