Corrosion-Resistant Pneumatic Actuator-Cylinder
1. Indicator: Multi-function position indicator with NAMUR standard mounting groove, you can easily install a variety of accessories, such as the valve positioner, limit switches.
2. Output shaft: High-precision one-piece gear output shaft made of nickel-plated alloy steel, in line with ISO5211, DIN337, NAMUR standards. Can be customized according to user requirements size, and stainless steel for choice.
3. Cylinder: ASTM6005 extruded aluminum cylinder body, with hard oxidation, optional epoxy coating PTFE coating or nickel plating and other surface treatment.
4. End cap: Die-cast aluminum alloy end cap with metal powder coating of various colors, PTFE coating or nickel plating.
5 Pistons: Double piston rack, made of cast aluminum hard oxide or cast steel galvanized, the installation position symmetrical, fast action, long service life, easy to reverse the piston can change the direction of rotation.
6. Stroke Adjustment: External two independent stroke adjustment screw can be easily and accurately in both directions ± 5 ° adjust the open and close position.
7. High-performance spring: Combined preload spring using high-quality materials, coating treatment, pre-press assembly. Has strong corrosion resistance and long service life. It is safe and easy to disassemble the single-acting actuator and change the number of springs to satisfy different torque output range.
8. Bearings and guides: the use of low-friction, long-life composite materials, to avoid direct contact between metal and metal, easy maintenance and replacement.
9. Sealing: O-ring at room temperature using nitrile rubber, high temperature or low temperature with fluorine rubber or silicone rubber.
1. Indicator: Multi-function position indicator with NAMUR standard mounting groove, you can easily install a variety of accessories, such as the valve positioner, limit switches.
2. Output shaft: High-precision one-piece gear output shaft made of nickel-plated alloy steel, in line with ISO5211, DIN337, NAMUR standards. Can be customized according to user requirements size, and stainless steel for choice.
3. Cylinder: ASTM6005 extruded aluminum cylinder body, with hard oxidation, optional epoxy coating PTFE coating or nickel plating and other surface treatment.
4. End cap: Die-cast aluminum alloy end cap with metal powder coating of various colors, PTFE coating or nickel plating.
5 Pistons: Double piston rack, made of cast aluminum hard oxide or cast steel galvanized, the installation position symmetrical, fast action, long service life, easy to reverse the piston can change the direction of rotation.
6. Stroke Adjustment: External two independent stroke adjustment screw can be easily and accurately in both directions ± 5 ° adjust the open and close position.
7. High-performance spring: Combined preload spring using high-quality materials, coating treatment, pre-press assembly. Has strong corrosion resistance and long service life. It is safe and easy to disassemble the single-acting actuator and change the number of springs to satisfy different torque output range.
8. Bearings and guides: the use of low-friction, long-life composite materials, to avoid direct contact between metal and metal, easy maintenance and replacement.
9. Sealing: O-ring at room temperature using nitrile rubber, high temperature or low temperature with fluorine rubber or silicone rubber.
Mud Pump for oil drilling
Mud pump has a longer stroke and can be operated at a lower stroke, thus improved the water supplying perfor-mance effectively and extended the lifetime of expendable parts in the fluid end greatly.
The power end uses combined lubricating system of forced lubrication and splash lubrication. Reliable to lubricate and promote the service life of power end.
This series mud pump are strictly manufactured according to API Spec 7k "the Equipment Specification of Well Drilling and Repairing", and are tested accordingly when leave factory.
Features of drilling rig mud pump
1. The pump has features of advanced structure, small volume, reliable operation, easy maintenance.
2. The cylinder is made of alloy steel forgings, and the three cylinders of each pump are interchangeable.
3. In order to enhance its corrosion resistance, the cylinder surface is processed by chemical nickel plating.
4. The design of straight-through cylinder valve structure, reduced the volume of the hydraulic cylinder and increased the volumetric efficiency.
Mud Pump,Mud Sucker Pump,Mud Hog Pump,Drilling Mud Pump
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.sjxitecdrilling.com