(1) The theoretical flow Qr of the gear pump has nothing to do with the characteristics of the pipeline, only depends on the pump itself, and the pressure provided depends on the characteristics of the pipeline, and has nothing to do with the pump itself.Extraction loss of the pump when the discharge pressure of the gear pump is increased Increase, so the actual pump flow slightly lower pressure increases (Figure 2-19)
　　
(2) The pump shaft power increases with the discharge pressure increases, the efficiency of the pump also increases, but the pressure exceeds the rated value, due to increased leakage within the pump, the efficiency will decline.
　　
(3) With the increase of liquid viscosity and gas content, the pump flow rate decreases and the efficiency decreases.
　　
(4) gear pump must be equipped with safety valve.
　　
(5) gear pump flow can not be adjusted by the outlet valve, often by-pass adjustment, speed regulation method to regulate the flow.
　　
(6) No need to pump the gear pump before starting, but be sure to open the valve before starting.
　　
(7) The gear pump is commonly used to transport non-corrosive oils and other viscous media with viscosities of 1-1x10mm2 / s (404x10mm abroad). It is not suitable for transporting liquid with solid particles and liquid with high volatility and low flash point.Aluminum Baler
Hydraulic Aluminum Metal Baler used to crush, cut and bale a wide range of scrap metal. They could deal efficiently and quickly with metals scraps, whether it`s something as small as Cans, Aluminium and steel turnings and Wire scrap, or as large and robust as steel sheet, washing machines, other white goods and whole vehicles. Choose a hydraulic metal baler metal benefit from a reliable and fit-for-purpose solution for your recycling needs.
Aluminum Shavings Baler, Aluminum Turnings Baler, Aluminium Profile Baler, Aluminum Scraps Baler
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-balers.com