Water Vapor Permeability Tester/Test Equipment/Gas Analyzer

Water Vapor Permeability Tester/Test Equipment/Gas Analyzer
Application:

    TR-WVTR-9002 is based on the electrolytic sensor method and available for the water vapor permeability test of flexible films, sheeting and packages. It can test 3 specimens in one operation but with one aver result of the specimens.
Films: 
Plastic films, aluminum foil, aluminized films, plastic composite films, paper-plastic composite films, coextruded films, aluminum foil composite films and many others.
Packages: 
Plastic, rubber, paper, paper-plastic composite, glass and metal packages, e.g. red wine bottles, blister, various plastic bottles, Coke bottles, peanut oil packages, Tetra Pak materials, vacuum bags, metal three-piece cans, plastic packages for cosmetic, soft tubes for toothpaste, jelly and yogurt cups.

Feature:

1.Electrolytic sensor method
2.Patent technology
3.Film and package test
4.3 specimens test simultaneously but with one aver result
5.One-button test, test automatically in whole process
6.Multiple test modes optional
7.Data curves display
8.Computer control
9.Digital flow adjustment
10.3 Chambers with 3 temperature sensors
11.Environment temperature and humidity sensor inside 
12.Chambers water bath technology 
13.Unit based on embedded system,24bit Δ-Σ AD 
14.Pressure, ppm water sensor and  temperature overload protection 
15.Traceable reference film calibration
16.Supports DSM system (DSM, lab data management system)
Principles
Film:
The specimen is clamped between the upper and lower chamber, the upper chamber is purged by high humidity nitrogen stream, and the other side of specimen, lower chamber is purged by a stream of dry nitrogen, due to the effect of water concentration gradient at two sides of the specimen, water molecules will permeate through the specimen into the dry nitrogen side, penetrated water molecules will be carried to the electrolytic sensor which generates the proportional signal, so water vapor transmission rate will be obtained by calculating the sensor signal.
Package:
The package is mounted on the lower chamber, the outside of the package is specified relative humidity, the inside of the package is purged by a dry nitrogen stream, water vapor will permeate through the wall into the inside of the package, penetrated water molecules will be carried to the electrolytic sensor which generates the proportional signal, so water vapor transmission rate will be obtained by calculating the sensor signal.

Specification:
Test range:
          Film:  0.001-20  g/m²Â·24h (Standard)     
                     0.01-400 g/m²Â·24h (Optional)
              Resolution: 0.001 g/m²Â·24h
              Package:
                            0.0001~0.3 g/pkg·d               
                 Resolution:
                            0.00001 g/pkg·d
Specimen amount:   3 specimens with one aver result
Temperature range:  5C - 95C
Temperature accuracy: ±0.1C
Humidity range: 0%RH,35%RH-90%RH,100%RH, standard condition 90%RH
Humidity accuracy: ±1%RH
Test area: 50 cm²
Specimen size:
             Film: size: >=150mm * 94mm
                          Thickness: less 5mm
             Package:
                     Max size: D120mm X 400mm                      
Carrier gas:  99.999% Nitrogen
Carrier flow:  0~200 ml/min
Gas interface:  1/8 inch
Power supply:  AC 220V 50Hz
Dimension:  730 mm X 590 mm X 350mm
Net weight:  56kg


Standards:
ISO 15106-3, GB/T 21529, DIN 53122-2, YBB 00092003

Configuration:
Delivery:  Main unit, computer, W-TRANS software, temperature controller, tank regulator, PCIE card, communication cable, sample cutter, vacuum grease.
Optional:  Package fixtures, reference film, vacuum grease, sample cutter, DSM system.
Note: Specifications are subject to change without prior notice.

Packing:



Company Information:
      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.



Why choose us?
1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;


 
Water Vapor Permeability Tester/Test Equipment/Gas Analyzer
Application:

    TR-WVTR-9002 is based on the electrolytic sensor method and available for the water vapor permeability test of flexible films, sheeting and packages. It can test 3 specimens in one operation but with one aver result of the specimens.
Films: 
Plastic films, aluminum foil, aluminized films, plastic composite films, paper-plastic composite films, coextruded films, aluminum foil composite films and many others.
Packages: 
Plastic, rubber, paper, paper-plastic composite, glass and metal packages, e.g. red wine bottles, blister, various plastic bottles, Coke bottles, peanut oil packages, Tetra Pak materials, vacuum bags, metal three-piece cans, plastic packages for cosmetic, soft tubes for toothpaste, jelly and yogurt cups.

Feature:

1.Electrolytic sensor method
2.Patent technology
3.Film and package test
4.3 specimens test simultaneously but with one aver result
5.One-button test, test automatically in whole process
6.Multiple test modes optional
7.Data curves display
8.Computer control
9.Digital flow adjustment
10.3 Chambers with 3 temperature sensors
11.Environment temperature and humidity sensor inside 
12.Chambers water bath technology 
13.Unit based on embedded system,24bit Δ-Σ AD 
14.Pressure, ppm water sensor and  temperature overload protection 
15.Traceable reference film calibration
16.Supports DSM system (DSM, lab data management system)
Principles
Film:
The specimen is clamped between the upper and lower chamber, the upper chamber is purged by high humidity nitrogen stream, and the other side of specimen, lower chamber is purged by a stream of dry nitrogen, due to the effect of water concentration gradient at two sides of the specimen, water molecules will permeate through the specimen into the dry nitrogen side, penetrated water molecules will be carried to the electrolytic sensor which generates the proportional signal, so water vapor transmission rate will be obtained by calculating the sensor signal.
Package:
The package is mounted on the lower chamber, the outside of the package is specified relative humidity, the inside of the package is purged by a dry nitrogen stream, water vapor will permeate through the wall into the inside of the package, penetrated water molecules will be carried to the electrolytic sensor which generates the proportional signal, so water vapor transmission rate will be obtained by calculating the sensor signal.

Specification:
Test range:
          Film:  0.001-20  g/m²Â·24h (Standard)     
                     0.01-400 g/m²Â·24h (Optional)
              Resolution: 0.001 g/m²Â·24h
              Package:
                            0.0001~0.3 g/pkg·d               
                 Resolution:
                            0.00001 g/pkg·d
Specimen amount:   3 specimens with one aver result
Temperature range:  5C - 95C
Temperature accuracy: ±0.1C
Humidity range: 0%RH,35%RH-90%RH,100%RH, standard condition 90%RH
Humidity accuracy: ±1%RH
Test area: 50 cm²
Specimen size:
             Film: size: >=150mm * 94mm
                          Thickness: less 5mm
             Package:
                     Max size: D120mm X 400mm                      
Carrier gas:  99.999% Nitrogen
Carrier flow:  0~200 ml/min
Gas interface:  1/8 inch
Power supply:  AC 220V 50Hz
Dimension:  730 mm X 590 mm X 350mm
Net weight:  56kg


Standards:
ISO 15106-3, GB/T 21529, DIN 53122-2, YBB 00092003

Configuration:
Delivery:  Main unit, computer, W-TRANS software, temperature controller, tank regulator, PCIE card, communication cable, sample cutter, vacuum grease.
Optional:  Package fixtures, reference film, vacuum grease, sample cutter, DSM system.
Note: Specifications are subject to change without prior notice.

Packing:



Company Information:
      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.



Why choose us?
1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;


 

Vacuum Formed Toys

Vacuum forming process is used to produce a variety of parts and components for toys and hobby products, including model cars, airplanes, children drones,and boats. The process allows for the creation of intricate shapes and designs at a relatively low cost.

The characteristics of vacuum forming toys:

1.Lightweight: Vacuum-formed toys are typically lightweight, making them easy for children to handle and play with.

2.Durable: Vacuum-formed toys are made from sturdy materials such as plastic, which makes them durable and able to withstand rough play.

3.Various types and colors. As custom vacuum formed,the toys can be with various types and colors.

4.Cost-effective: Vacuum forming is a cost-effective manufacturing process, making vacuum-formed toys affordable for consumers.

5.Safe: Vacuum-formed toys are typically designed with rounded edges and non-toxic materials, ensuring the safety of children during play

6.Easy to clean: Vacuum-formed toys are easy to clean and maintain, as they can be wiped down with a damp cloth or washed with mild soap and water.

7.Eco-friendly: Vacuum-formed toys can be done using recyclable materials which is environmentally friendly.

Vacuum Formed Toys,Vacuum Forming Service,Custom Vacuum Forming,Vacuum Forming

Dongguan Yiyongli Industrial Co.,Ltd. , https://www.dgthermoforming.com