Two AQSIQ Scientific and Technological Planning Projects of Shanxi Metrology Institute Accepted

[ China Instrument Network Instrument R&D ] On the morning of March 30, 2018, entrusted by AQSIQ, Shanxi Provincial Bureau of Science and Technology organized a "high-speed impact friction spark test device" and a "mine high-concentration methane sensor" at the Shanxi Metrology Institute. Development of an on-line climatic environment test facility" acceptance of the two AQSIQ science and technology projects.

The picture shows acceptance site
The Mine High Concentration Methane Sensor is an intrinsically safe detection instrument designed to monitor the concentration of methane gas in the mine. The methane concentration can be detected and an alarm can be issued when necessary to provide technical support for the scientific production and safe production of mining operations.
In addition, with the continuous improvement of the degree of mechanization of coal mines, light alloys are increasingly used in wells, such as pillars and fan impellers. When these light alloys collide and friction with other metals or rocks, they can easily generate frictional sparks that can ignite methane, which poses a threat to the safe production of coal mines. Therefore, research on high-speed impact friction spark test equipment will help improve coal mine production safety and avoid accidents.
Experts at the meeting listened to the report of the research group, reviewed relevant data, examined the site, agreed to pass the examination and discussion, and accepted the acceptance. The conclusion of the acceptance concluded that the two projects have respectively filled the “high-speed friction impact spark test device” and “mine "Using high-concentration methane sensors for the development of an online climatic environment test device" blank.
The two scientific research achievements of "High-Speed ​​Impact Friction Test Apparatus" and "Development of Online High-Concentration Methane Sensor Online Climate Environment Test Device" were directly applied to the National Coal Mine Safety Measuring Instruments Product Quality Inspection Center Inspection Project, and the Shanxi Metrology Institute (Center) was upgraded. The detection capability of the system has an extremely important significance in guaranteeing the quality of coal mine safety measuring instruments and effectively serving the safe production of coal mines.
(Original title: Our two AQSIQ science and technology projects successfully passed the acceptance of experts)

Manual Saw Blade Pipe Cutting Machine

1. Servo motor driving feeding system with AC servo motor / C5 level ball guide screw and linear guide rail, fast, stable and accurate. Maximum feeding speed of 1000mm / s and feeding length of 1000m, multiple feed.
2. Gearbox driving Saw Blade, is produced by casting and processing by CNC machining center, which is stronger and more accurate. Inside, the core components of gearbox are imported from Taiwan, which produced with advanced milling and vacuum heat-treatment, so they are precise and long lifetime, lower noise and high transmission efficiency. Saw blade can work stable and process in long lifetime.
3.The special designed clamp has strong clamping capacity, firm, safe and reliable.
4. Automatic circulation of coolant ensures smooth cutting surface and long service life of saw blade.
5. Great Clamping device of pipes can decrease pipes vibration during working to extend saw blade lifetime and guarantee feeding speed with the Patent No.ZL 2009 1 0039079.8
6. Servo tail processing device, when the material is more than 100mm left, automatically cut the tail, avoiding that after the former automatic pipe cutting machine has finished cutting, the tail should be cut again separately, saving material and labor and improving production efficiency. Min tail length is 20-30mm.
7. Stop gauge is equipped, that used as keeping alignment of pipes and providing original point for system in order to improve preparing time and avoid the mistake of feeding by manual.
8. Control system is developed by Chittak that is with rich database, and can be updated. Easy operate.
9. It is equipped with an automatic detection and alarm information system, which is convenient for users to troubleshoot.
10.Using Mitsubishi PLC controller, the circuit is simple and the maintenance is simple, response is fast.
11.Can set 5 different cutting lengths for a single material to reduce waste of surplus materials.
12.Length digital display and easy setting and operating in control system.
13.The model can be updated with automatic loading system that can greatly improve efficiency and save the labor cost. Meanwhile, it can be equipped with conveyor belt to transport the finished goods to next machine process. All updated functions can be controlled by Cutting Machine System.

Pipe Cutting Machine Blade,Manual Pipe Cutting Machine,Manual Saw Pipe Cutting Machine,Pipe Cutting Machine Saw Blade

GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctklasercutter.com