Among the 50 key energy-saving technologies published by the National Development and Reform Commission (NDRC) recently published in the “National Key Energy Conservation Technology Promotion Catalogue (First Batch)â€, the new conversion gas-based alkali technology was selected as a tool to overcome energy-saving and emission reduction in the soda industry. Zhou Guangyao, an academician of the Chinese Academy of Engineering, led the development of this advanced alkali-producing technology, which has significant energy-saving and emission-reduction effects after being used in the company. According to analysis by China Soda Industry Association, this technology can reduce the energy consumption per ton of alkali in China from 10,000 to 15,000 MJ to 8,000 MJ, and the unit energy consumption per ton of alkali can be reduced by 30%. Using this technology, raw material salt utilization can reach 99%, and raw material ammonia utilization can reach 96%.
The advantages of energy-saving and consumption-reduction highlight the new conversion gas-alkali technology has several advantages in terms of energy conservation and consumption reduction: First, the process is the shortest and the equipment is the least. The process combines the two processes of decarburization of ammonia system with alkali production of alkali to form a unit, eliminating the need for investment in the carbon dioxide removal process of the ammonia system, and enabling the decarbonization process to be completed part-time by the alkali production process, as long as the conversion gas is directly introduced into the process. The base tower completes the decarburization task. The second is that the equipment is full-featured and highly efficient, eliminating the need for ancillary equipment. In the past, it was necessary to use two equipments to complete the production of alkali and purification, and the new conversion gas to make alkali has improved the structure of the equipment so that one tower played the role of two towers. Moreover, due to the greatly extended washing cycle, wastewater discharge is also reduced and consumption is reduced.
At the same time, by using this technology, the electricity consumption of synthetic ammonia tons of alkali can be reduced by 100 to 120 kWh, the electricity consumption of Alkali alkali can be reduced by 60 kWh, and the gas saving can be about 70 to 110 kg/ton of alkali. The calcining section can increase the production capacity. % of water; the average estimated water saving is 15~25 kg/ton of alkali. The production system is a closed circuit system with no wastewater discharge.
In addition, the technology also implements computer operation control. At the same time, due to the reduction of processes and equipment, the workload of civil works, electricity meters, installations, etc. has been correspondingly reduced. On the same scale of facilities, the application of this technology can save investment in fixed assets by 20% to 25%. According to a rough calculation, every ton of alkali (including 1 ton of ammonium chloride) can reduce the cost of 42 to 48 yuan.
Promotion and application of industrial competitiveness to improve the competitiveness of the industry The application of the new conversion gas-alkali production technology to joint-alkali production enterprises not only has significant energy-saving effects for ton-alkali, but also can effectively prolong the operation cycle of the alkali production tower, improve the quality of the heavy alkali crystals, and achieve significant shrinkage of the mother liquor of the alkali system. In turn, we will achieve zero discharge of wastewater from the production of associated alkalis. This is of great significance to the realization of cleaner production and the adoption of a recycling economy in the soda industry, so the prospect for promotion is very broad.
During the “Eleventh Five-Year Plan†period, China Soda Industry Association will vigorously promote this technology to the entire industry. The technology's current penetration rate in the soda industry is around 15%, and it is expected to reach 50% during the "Eleventh Five-Year" period, and energy savings of 200 million kJ can be achieved.
So far, this domestic first and internationally leading new technology for alkali production has been promoted and applied in more than a dozen homes in China, and has achieved significant energy-saving and emission-reduction effects as well as economic and social benefits. Taking Shijiazhuang Shuanglian Chemical Co., Ltd. and Shanxi Fengxi Group Aoshan Alkali Industry Co., Ltd. as an example, the former invested 150 million yuan to implement 300,000 tons of new energy-saving conversion gas-based technology and the latter invested 150 million yuan. 10,000 tons of new conversion gas production alkali technology project. Both companies have achieved clean and efficient production with an annual increase of 60 million yuan in profits and taxes and a new profit of 40 million yuan. The investment recovery period is only 3.5 years.
China Soda Industry Association recommends that joint-alkali enterprises should use this technology to carry out energy-saving technological reforms, and enterprises using ammonia-alkali production can use this technology for relocation and resettlement.
Metal Body Square Water Cooling Tower
This series of products run stable, low noise, energy-saving, in office buildings, shopping malls, hotels, residential areas and other central air-conditioning supporting the use of better results.
The company's standard cooling tower according to the international design conditions design, can also provide customers with non-standard operating conditions or specific sizes under the special, special design.
The circulating water pump suction port shall be located below the water level of the cooling tower catchment basin, and the cooling tower outlet pipe shall not be allowed to be higher than the maximum water level of the catchment basin.
Pipe mounts should be pipe racks and cooling towers should not be allowed to directly bear the weight of the pipes.
The rehydration pipe of the cooling tower should be provided with a support stand to avoid vibration of the pipe when the float valve is rehydrated.
Rehydration pressure should be below 5m water pressure, national standard
The flannage pressure is 1.0Mpa.
When two or more units are assembled, our company will provide a connecting balance tube to balance the chassis water level. The tower top inlet should be set with a conditioning valve in order to enter each
.The water level of the tower is uniform.
The noise is measured at dm1.13VL-W at the equivalent diameter of the cooling tower (Dm1.13VL*W), 1.5 meters above the ground height, wherein L and W are the shape rulers of the tower
inch long and wide).
The use of cellular continuous blister series of diversion,heat dissipation, water collection three-in-one native filler, the whole suspension, gravity cloth water, low drop of water, with cold effect
High, low energy consumption, less drift water, less noise and so on, floating water rate is less than 0.001%.
When connecting different types of towers, the bottom basin water level height of different types of towers must be taken into account, and the base height must be adjusted to maintain the water level balance of the towers.
Metal Body Square Water Cooling Tower,Tower Water Cooler,Water Cooled Cooling Tower,Tower Cooling System
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhou-arkfluid.com