Smoke alarm installation requirements

What I want to introduce is the installation instructions of wireless smoke alarm, because everyone needs to be careful and safe during the installation process.

Wireless smoke alarm installation requirements:

1. Installation and use:

Select the monitoring area, and fix the gas alarm on the roof or ceiling of the monitoring area. Spot welding machine

2. Note:

Do not install outdoors;

Do not install in places with large air flow, such as air inlets, ventilation fans, room doors, etc .;

Do not install in a place where the temperature exceeds 10 ~ 50 ℃, or in a relatively humid place;

The installation position of the alarm must be greater than 0.75 meters from the wall corner;

Must be dust and moisture resistant;

3. Maintenance:

Due to factors such as dust, the sensitivity of the alarm will decrease, so it must be tested and maintained frequently:

Test the alarm once a week, just press the test button;

Clean the alarm every six months: turn off the power and clean the dust with a soft brush.

The above editors explained the installation requirements of smoke alarms through three aspects of introduction. I hope everyone understands and learns.