Smell smells the fault of the dump truck

Even sitting in the cab of the dump truck, that is able to identify some failures dump truck by smell. A whole dump truck is made up of tens of thousands of large and small parts and components, and if every part of the vehicle has a very small taste in the normal operating environment, but as long as it is When one of the dump trucks receives a prize, there is an abnormal breakdown, and when it is consumed and worn out, it will give off a taste, so when you sit in the cab, you can identify it by smelling it. Some problems with the problem.

If there is a scorched taste in the dumper's cab with a plastic product, most of it may be caused by the overheating of the electrical wiring in the car. However, when the line is burned, most of them will have local temperature too high and there will be a partial hairiness. As long as the driver is careful and careful inspection is to be able to find the source of the fault.

When the tipper smells a smell that is not scorched by the metal when it is traveling, it is mostly because the clutch of the vehicle has been overheated or burned when it is rubbing. If the clutch of the dump truck is in use, the performance is normal, or there is no difficulty in starting or when the gear is difficult to catch gear, and when the vehicle is inspected, the smell does not come from the front of the dump truck. In part, when coming from the second half of the vehicle, the driver would need to check if the rear brake system of the dump truck is overheated.

If the smell the driver smells is the smell of mixed oil, then you need to be careful about this life, because then the burning point of the oil is not the same, so that there will be smoking in peacetime. This is not a normal phenomenon. When the pipeline of the dump truck has leakage and aging, it may cause the engine oil to fall to the exhaust pipe and the engine of the vehicle. If the smell of the dump truck is burst, it may cause fire. The most important thing to happen at this time is to send the dump truck to the repair shop.

 

Servo hydraulic injection machine

Micro Servo Motor Injection Moulding Machine,Customized Injection Plastic Mold,90 Ton Injection Molding Machine,Small Plastic Injection

Turn Machine (Zhejiang) Co., Ltd , https://www.plasticblowing.com