Liberating sprinkler fuel gauge water temperature table knowledge

Liberating the sprinkler fuel gauge indicates the amount of fuel in the fuel tank.
0: No fuel in the fuel tank.
1: Indicates that the fuel in the fuel tank is full.

After turning off the start switch, the pointer still indicates the amount of fuel in the fuel tank.

Two fuel tanks, each with a capacity of 200L.
The continuous mileage of the car is 1000km.

Liberating the sprinkler water temperature gauge The water temperature gauge indicates the engine coolant temperature, between 50 and 110 the normal temperature. After each cold start of the engine, it must be warmed up at a low speed to warm up. When the temperature of the coolant reaches 50°C or more (about the right of the short line on the right side of the scale 50), it can start driving. While driving, pay attention to the water temperature meter and keep the coolant temperature within the range of 75-95°C (approximately halfway between the two scales).
If the pointer is out of the 110 scale, it indicates that the engine has a tendency to overheat and should stop immediately to check and troubleshoot. Under normal use conditions, the radiator cord is fully open, and the thermostat and fan clutch automatically adjust the coolant temperature to the optimum operating temperature. When it is particularly cold, the radiator cord can be lowered to adjust the coolant temperature.

Liberating the sprinkler oil pressure gauge indicates the operating pressure of the oil in the main oil gallery of the engine.

After the engine is started, check the oil pressure. Always observe the oil pressure while driving. When the engine is running normally, the pointer of the oil pressure gauge is normal between 0 and 6. If you find the oil pressure is too low, the pointer does not move or the pointer suddenly changes, you should stop and check to prevent burned parts. When the engine is working, the oil pressure must not be lower than 167 kPa. 【 For more details click to enter] or log on the official website: http:// 24 hours car consultation Cai manager

Air Shower Room And Cargo Shower Room

Application

Air shower is the necessary purification equipment for personnel to enter the clean room and dust-free workshop. It has strong universality and can be used with all clean rooms and clean workshops. When the staff enters the workshop, they must pass this equipment, with strong and clean air, sprayed from all directions by the rotating nozzle to the person, and effectively and quickly removed the dust, hair, hair debris and other debris attached to the clothes. It can reduce the pollution problem caused by people entering and leaving the clean room. The two doors of the air shower room are electronically interlocked, which can also act as an air gate chamber to prevent external pollution and unpurified air from entering the clean area. Prevent the staff from bringing hair, dust and bacteria into the workshop to meet the strict dust-free purification standards of the workplace.

Structure

1. The air shower room is composed of several parts, such as box body, stainless steel door, high efficiency filter, air blower, distribution box and nozzle.

2, the box is made of high quality steel plate, surface electrostatic treatment, beautiful and generous, the inner bottom plate is made of stainless steel plate friction resistance, easy to clean.

3, the main material and dimensions of the box body can be customized according to customer requirements.

Air shower room ,cargo shower Room ,airshower room use pvc high speed door

SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfahsrs.com