In early 2017, JCB introduced a new line of operating platforms that can be used in the Loadall of the telehandlers, which are used in the four best-selling telehandler models. The new range of work platforms has a maximum operating height of 20.3 meters and a maximum operating range of 11.63 meters.
JCB launches new series of telehandlers (Loadall)
The following describes its main features:
JCB's own range of self-designed platforms can be used on the 14-meter-meter telescopic forklift Loadall model. Depending on the Loadall model, the user can choose from three operating platform models: 365kg, 500kg and 1000kg; 2.4m wide is the smallest platform model, and the other two larger models can be 2.2m wide. Expanded to 4.4 meters, achieving 180 degrees of rotation.
Depending on the Loadall model and the joystick control system, the new work platform can be installed on the 540-140, 540-170, 540-180 and 540-200 models. The driver can remotely control the work platform for greater operational flexibility and avoid interference from the harness. Before the whole machine enters the “work platform modeâ€, the system will realize the interlock of the parking brake and the equipment legs, and the transponder key realizes the conversion of the whole machine control to the remote control of the working platform. This safety setting avoids the use of the working platform. The device in the move. When the user does not need the work platform, the JCB quick change device allows the user to complete the disassembly of the work platform in a few seconds, use the transponder key to switch to the whole machine control mode, and then use the function of the telescopic forklift. This greatly increases the usage and versatility of the device.
All JCB work platform models are compliant with the European EN280 standard (the standard for the design and manufacture of European regulated aerial work platforms). The rear axle locks are installed on the Loadall frame of the installation platform to ensure maximum stability. The working platform with swivel function uses JCB's innovative chain drive mechanism to ensure stepless, smooth and stable rotation during 180 degree swing operation.
Loadall is also equipped with an emergency recovery system that complies with the EN280 standard, ensuring that the boom can safely fall to the ground in the event of an engine failure or fuel drain. In addition, Loadall is also equipped with an audible alarm that automatically alerts and warns the operator that the platform is being lowered to the ground when the boom angle is below 20 degrees. The interlocking pin of the Q-fit quick changer ensures a safe locking of the platform. In addition, the platform is equipped with a load monitoring system integrated with the whole machine adaptive load control system, which can prevent the load on the platform from overloading, thus ensuring the absolute safety of the operation.
Tubular tungsten carbide welding rods are a type of welding consumable used for hardfacing applications. They are made by filling a tubular steel rod with a mixture of tungsten carbide particles and a binder material.
The tungsten carbide particles provide exceptional hardness and wear resistance, making them suitable for applications where the welded surface needs to withstand high levels of abrasion, erosion, or impact. The binder material helps to hold the tungsten carbide particles together and facilitate the welding process.
Welding Rod,Welding Rod Price,Best Welding Rods,Tungsten Welding Rod
Luoyang Golden Egret Geotools Co., Ltd , https://www.hvafspray.com