According to the solid transport theory, tapering and longitudinal grooves are machined on the barrel wall of the charging section and intensive cooling is performed, which greatly improves the solid transport power. If the structure of the cylinder used in this way, when planning the screw must be in the melting section and the homogenization section to adopt the appropriate method so that the melting rate, homogenization and feeding section can be consistent with the delivery.
Screw pump contains three screw pump and single screw pump and twin screw pump, the internal structure is inseparable from the screw on the screw we know not many, what is the most durable screw? At present, China's commonly used screw material 45 steel, 40Cr, ammoniated steel, 38CrMOAl and so on.
1) 45 steel cheap, good processing, but poor wear-resistant corrosion-resistant. Heat treatment: tempered HB220-270, high frequency quenching HRC45--48
2) 40Cr better than 45 steel, but usually to be coated with a layer of chromium, in order to improve its corrosion-resistant wear-resistant ability. However, the demand for chrome layer is higher, the coating is too thin and easy to wear, it is easy to fall off when it is too thick, but corrosion is accelerated after it falls off, which is less used at present. Heat treatment: tempered HB220-270, hard chrome plated HRC> 55
3) Nitrided steel, 38CrMoAl excellent comprehensive function, the use of a wide range of contrast. Nitride layer is usually 0.4-0.6 mm. However, this information against the corrosion of hydrogen chloride is low, and offers higher.
Modern false twist texturing (DTY) machines are equipped with up to four nip roller feeds per texturing position. Nip rollers have a major impact on the drawing process and therefore exert a direct influence on the quality of the textured yarn. Our products ensure a significant reduction in power consumption while maximizing productivity.
Stop twister is used in the false twisting process of synthetic fibers and is intended to prevent twisting. Therefore, it is also called a non-twist wheel. There are two types: metal with hard chrome plating and ceramic.
For PU disc ,we are available in a variety of thicknesses and diameters, the product offers the most suitable dimensions, adheres to tight manufacturing tolerances and ensures strict quality control for the best results for specific yarn ranges and processes.
rotating parts,plastic texturing chuck,draw textured yarn machinery,barmag dty parts
Yixing Aurora Ceramic Technology Co., Ltd. , https://www.auroracera.com